| Approximate Hourly Capacities At 100% Crush |
| Machine | 20nm(1") setting | 25nm(1") setting | 30nm(1.1/4") setting | 40nm(1.1/2") setting |
| nm | inch | tons | m3 | s. tons | tons | m3 | s. tons | tons | m3 | s. tons | tons | m3 | s. tons |
| 600x150 | 24"x6" | 14 | 8 | 15 | 18 | 11 | 20 | 22 | 14 | 24 | 25 | 16 | 28 |
| 18 | 11 | 20 | 22 | 14 | 24 | 26 | 17 | 29 | 30 | 19 | 33 |
| 1220x150 | 48"x6" | 30 | 18 | 35 | 35 | 21 | 40 | 40 | 25 | 45 | 45 | 28 | 50 |
| 40 | 25 | 45 | 45 | 28 | 50 | 45 | 28 | 55 | 50 | 31 | 60 |
| |
| Data |
| Machine | Max. size feed | Max. jaw setting closed position | Min. Recommended Jaw Setting | Power Requirement | | Fly Wheel (DIAXFAC) | V-belt reqd. | Approx. Weight |
| mm | inch | mm | inch | mm | inch | mm | inch | kw | rpm | mm | inch | qty. | tons |
| 600x150 | 24"x6" | 125 | 5 | 40 | 1.5 | 40 | 0.75 | 30 | 320 | 915x180 | 36.2x7 | 6 | 4 |
| 1220x150 | 48"x6" | 125 | 5 | 40 | 1.5 | 20 | 0.75 | 60 | 320 | 1320x250 | 52x10 | 6 | 9 |
| Pt. No. | Description | Pt. No. | Description | Pt. No. | Description |
| 1 | Body | 12 | Side top plate (left) | 23 | Draw back washer with lug |
| 2 | Groove block | 13 | Side top plate (right) | 24 | Draw back washer plain |
| 3 | Jaw stock toggle liner | 14 | Fly wheel key | 25 | Draw back road spring |
| 4 | Toggle Plate | 15 | Screen drive pulley | 26 | Fly wheel (left) |
| 5 | Wedge Block | 16 | Side check bolt | 27 | Fly wheel (right) |
| 6 | Jaw stock | 17 | Jaw bolt head | 28 | Side bearing grease cap (left) |
| 7 | Bolt for jaw bolt head | 18 | Fixed Jaw | 29 | Side bearing grease cap (right) |
| 8 | Jaw stock bearing | 19 | Fixed jaw packing plate | 30 | Side bearing cap (left) |
| 9 | Jaw stock flange | 20 | Swing jaw | 31 | Side bearing cap (right) |
| 10 | Eccentric shaft | 21 | Draw back road pin | | |
| 11 | Jaw stock grease cap | 22 | Draw back rod | | |