120 TPH(APA)

The entire plant can be moved from site to site and as there is no foundation of the machinery involved. After operations, the plant can be tugged back into the shed. It is most suitable for people having different sites.

Detail Specifications :-
As per the customers’ requirement the plant is fitted with a crusher and Three Granulators. All machines are single toggle models, which grease cooled and fitted with double rows roller bearings. It has M. S. fabricated structure with forged steel shaft. The plant has one diesel oil engine as per British standards. The engine along with an alternator has the capacity to drive the crusher, granulators & other accessories of the plant. The plant can also be provided with electric motors alongwith the starter switch and control panel.

Crusher/Granulator:-

Crusher No.	AC – 48– 1
Granulator Nos.	AG – 48 – 3
Capacity	120 tons/hr.
Feed Size	300 mm & down
Out Put Size	40 mm & down.
Percentage of Output Product (For reference only)	- 40 + 20 – 28 %. - 20 + 10 – 35 %. - 10 + 5 – 22 %. - 5 + 0 – 15 %.

Vibrating Screen:-

Size	12’ x 5’
Screen	The sheet or woven screen hole is made as per customers’ Specification
Decks	4 – Deck.
Capacity	150 tons/hr
Mode of Drive	Electrical

The screen is fabricated from MS sheets with supporting channels and angles for extra strength.Helical springs are provided to facilitate vibration of the screen. The screen, supporting structures and driving motor are all mounted on the same trolley.

Feeding Hopper
It is made of MS plate with 10 mm thick liner plates with 12 mm x 40 mm MS flats. This is supported on M. S. Channels which is provided with vibrating feeder to suit the capacity of the crusher. The holding capacity of the hopper is 7 m3.

Inner Feeding Conveyor :-

No. of Conveyor	2
Capacity	150 tons/hr
Width of conveyor	750 mm
Length of conveyor	10 mtrs.
Mode of Drive	Motors
Head Drum Pulley	Rubberised
Throughing Idlers	Rubberised
Belt	Standard quality 315/3 nylonendless vulcanized rubber belt

Shipment Details : -

Length	5Mtr., 5 Mtr., 4 Mtr.
Width	2.5Mtr. 2.5Mtr. 2Mtr
Feeding Height	5 Mtrs.
Weight	60 Tons total.
Container details	6 container of 20’ size,
Single largest weight	9 Tons.
Mode of despatch	Semi dismantle condition

Trolly :-

No of section	3
No. of wheels	6, 4 & 4
Type of wheels	Pneumatic tyres
Size	1210

Complete structure of the trolley is fabricated with heavy channels and fitted with ball bearing in the housing on the wheel for easy movements during to-swing. Sufficient space to accommodate the crusher & granulator, engine, alternator, vibrating screen, feeding conveyor & discharge conveyors. Vibrating feeder is used at the feeding hopper to keep the feeding height of the plant minimum.